Gradall Forklift Part

Gradall Forklift Parts - The Gradall excavator was the creation of two brothers Ray and Koop Ferwerda. The excavator was founded In the 1940's throughout World War II, when there was a scarcity of labourers. Partners in a Cleveland, Ohio construction company called Ferwerda-Werba-Ferwerda, the brothers faced a huge dilemma when lots of men left the labor force and signed up in the military, depleting existing workers for the delicate finishing work and grading on highway projects. The Ferwerda brothers opted to build an equipment that will save their business by making the slope grading work easier, more efficient and less manual.

Their first design model was a machine with two beams set on a rotating platform that was affixed over a used truck. A telescopic cylinder moved the beams forward and backward which enabled the fixed blade at the end of the beams to pull or push dirt. Before long enhancing the very first design, the brothers made a triangular boom to add more strength. What's more, they added a tilt cylinder that let the boom turn 45 degrees in either direction. A cylinder was positioned at the back of the boom, powering a long push rod to allow the equipment to be outfitted with either a bucket or a blade attachment.

Gradall introduced in 1992, with the introduction of the new XL Series hydraulics, the most ground-breaking adjustment in their machinery ever since their creation. This new system of top-of-the-line hydraulics allowed the Gradall excavator to provide high productivity and comparable power to the more traditional excavators. The XL Series ended the first Gradall equipment power drawn from low pressure hydraulics and gear pumps. These conventional systems effectively handled grading and finishing work but had a difficult time competing for high productivity jobs.

Gradall's new XL Series excavators showed more ability to lift and dig materials. With this series, the models were made with a piston pump, high-pressure system of hydraulics which showed noticeable improvement in boom and bucket breakout forces. The XL Series hydraulics system was even developed together with a load-sensing capability. Traditional excavators use an operator so as to choose a working-mode; where the Gradall system can automatically adjust the hydraulic power intended for the job at hand. This makes the operator's whole task easier and likewise saves fuel simultaneously.

When their XL Series hydraulics became available, Gradall was basically thrust into the highly competitive market of machines meant to tackle demolition, pavement removal, excavating as well as other industrial work. Marketability was further enhanced with their telescoping boom due to its exclusive ability to better position attachments and to work in low overhead areas.

Click to Download the pdf

Forklift Parts

Forklift Controllers

Forklift Controller - Lift trucks are obtainable in a variety of different models that have varying load capacities. Most average forklifts used inside warehouse environment have load capacities of one to five tons. Bigger scale units are used for heavier loads, such as loading shipping containers, can have up to fifty tons lift capacity. The operator can utilize a control...

More

---

Forklift Brake

Forklift Brakes - A brake wherein the friction is supplied by a set of brake pads or brake shoes which press against a rotating drum unit known as a brake drum. There are a few specific differences among brake drum types. A "brake drum" is commonly the explanation given whenever shoes press on the interior outside of the drum. A...

More

---

Differential for Forklifts

Forklift Differential - A differential is a mechanical machine which can transmit torque and rotation via three shafts, often but not always utilizing gears. It normally works in two ways; in vehicles, it provides two outputs and receives one input. The other way a differential operates is to combine two inputs in order to produce an output that is the...

More

---

Daewoo Forklift Attachment

Daewoo Forklift Attachments - Kim Woo-Jung, the son of the Provincial Governor of Daegu, started the Daewoo group during the month of March of the year 1967. He first graduated from the Kyonggi High School and afterward studied at Yonsei University in Seoul where he completed a Degree in Economics. Daewoo became amongst the Big Four chaebol in South Korea....

More

---

Truss Jib

Truss Jib - Truss jib's can be used in order to pick up, move and position trusses. The additional part is designed to operate as an extended jib attachment together with a triangular or pyramid shaped frame. Normally, truss jibs are mounted on machines like a skid steer loader, a compact telehandler or even a forklift making use of a...

More

---

Attachments for Reach Trucks

Reach Truck Attachments - Reach trucks are loading machines used by types of companies that keep up a storeroom facility or distribution center concerning the organization of finished goods and equipment on pallets which are inserted into high shelving units. This device provides straightforward and reliable retrieval of the loaded pallets whilst ensuring proficient storage of cargo that are not...

More

---

Compact Scissor Lift Part

Compact Scissor Lift Parts - The scissor lift or table lift, is a mechanized industrial lift that may be tailored to be used in retail, wholesale, manufacturing and production environments. Industrial scissor lifts have been used chiefly within production and manufacturing facilities for many decades to successfully hoist and lower materials, people and other equipment. The scissor lift is a...

More

---

Scissor Lift Attachment

Scissor Lift Attachments - The scissor lift or table lift, is a mechanized industrial lift that may be customized to be utilized in retail, wholesale, manufacturing and production environments. Industrialized scissor lifts have been used mostly within production and manufacturing facilities for many decades to effectively hoist and lower supplies, people and other equipment. The scissor lift is a platform...

More

---